The specification of the ring mill

When we say the specification of the ring mill, we say H110/V90-Φ2,000/500.
Do you what does it mean?
See the video below:

Comments

Post a Comment

Popular posts from this blog

Controlling the roation speed of main roll

Image
I explained that the rotation speed of the main roll is constant in the ring rolling machine( Rotation speed control of axial roll ). But it isn’t constant in the CALTEK ring mill. I’ll tell you why the rotation speed of the main motor is not constant in our ring mill. Increasing the rotation speed of the roll during rolling can reduce the rolling force because the coefficient of friction between the roll and the workpiece becomes smaller.  That’s why I always ask the ring mill operators to make the rotation speed of the main roll as fast as possible.  However, if the size of the ring is small, the ringmill operator should not rotate the main motor in the maximum speed. I’ll explain the reason with this ring mill belows: * Main motor rpm : 0 ~1,200 * Main roll gear box reducer ratio : 1/40 * Axial roll cone angle : 40 * Axial roll gear box reducer ratio : 1/10 * Axial motor rpm : 0~1,400 * TR range : 200~600 Tis is a graph of the rotational speed of the axial motor according t...
Read more

Do you know why the axial roll is cone shape?

Image
The three main rolls in the ring mill are the main roll, the mandrel and the axial roll. This means that these three rolls wear quickly and that these rolls should be replaced frequently. And among these three rolls, axial roll is the most expensive roll. Because the axial roll is cone shape, it is difficult to machine.   Why is the axial roll not a cylindrical shape that is easy to machine, but a cone shape that is difficult to machine? I have to explain the linear velocity of the axial roll to tell the reason. I explained the linear velocity of the main roll before  YouTube(What is the linear velocity) In the ring mill, the main roll and axial roll rotate the ring.  The linear velocities of the ring by the main roll(V1) and by the axial roll(V2) should be same.  This ensures that the ring remains in the center of the ring mill. When the linear velocity(V2) of the axial roll is faster or slower than the linear velocity(V1) of the main roll, the center of the ...
Read more

Movement of the Axial Stand in the ring mill.

Image
What is axial stand? The axial stand supports the axial roll assembly and moves the axial roll assembly as the ring grows.   There are axial rolls, axial roll gear box, axial roll motor and TR in the axial stand. Movement of the axial stand The axial stand is moved by the hydraulic cylinder in the direction of the long axis of the ring mill. I explained in my previous post( Do you know why the axial roll is cone shape? ) that the linear velocity distribution by the main roll and the linear velocity distribution by the axial roll correspond when the virtual vertex of the axial roll(C a ) coincides with the center of the ring(C r ). The ring mill program controls the position of the axial stand so that the virtual vertex of the axial roll matches the center of the ring. As the ring rolling progresses, the ring becomes larger. As the size of the ring increases, the center of the ring moves away from the main roll. As the center of the ring moves, the axial stand ...
Read more